Projects

Commercial Roofing Services believes that the installation of a white roofing membrane is the most economical installation on the market today. Decreased life cycle costs, repair costs, and conditioning costs are just some of the reasons to contact Commercial Roofing Services today about your next roofing project.

Blistering in the field area and sizeable previously attempted repairs were noted upon assessment.

Commercial Roofing Services President, Mr. Jeff Butler, believes strongly in building trust with his clients and the value of long-term relationships. "Our goal," Mr. Butler states, "is doing the job right and treating people right."

The project consisted of the installation of approximately 111,000 square feet of white Duro- Last roofing membrane.

"The original roof was tar and gravel built up," notes Mr. Butler, "and problems with the system included an outdated roof assembly with failure at the penetrations, perimeter edges, and firewalls."

Over 200 roof top units, numerous penetrations, and gas lines were just some of the obstacles that were overcome.

The Duro-Last white roofing membrane is highly light reflective and repels up to 86% of the sun's ultraviolet rays. Mr. Butler explains: "The installation of a white roofing membrane has the potential to save the building owner money on energy costs. These savings can actually help the customer pay for his roof. The savings experienced is realized most by the building owner who conditions his building year round."

he old, worn out BUR did not need to be torn off to install a new, 40 ml roofing system from Duro-Last Corporation. This saved actual roofing time and was cost effective for our client.

The Duro-Last system is mechanically attached to the existing deck via a tab system. A free 15 year warranty from Duro-Last Corporation is issued at job's end.

Parapet walls are properly flashed and heat welded by CRS technician. All seams are checked by Duro-Last Quality Control representative after roofing project is complete. No man made glues or solvents are used to attach the membrane to the existing roof.

Existing roof stack flashed and banded.

Looking across the deck as project nears completion. Parapet material is taken up the parapet walls and terminated on parapet top on this project.